PASSIVE PRE-FILTER MODULES, LASER FUME EXTRACTORS

PF801/PF401 Passive Front Access

Pre-filter Modules Capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter. Designed to enhance the performance of the SPH800/SPH400 air purifiers.

Who needs it?
Customers that have heavy dust loadings or any type of “sticky” fumes will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

How can I use it?
The PF801/PF401 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are available upon request.

| More on our Passive Pre-filter Modules for Laser Fume Extractors |

Call us, toll free, 1-800-626-0664, for help with your product selection. You could also send us a completed contact form on this page. 

LASER CUTTING | STICKY SMOKE | PREMATURE CLOGGING

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF800/PF400 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

Who needs it?

Customers that have heavy dust loadings will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

What’s inside?

The PF800/PF400 modules contain three (PF800) or two (PF400) high-capacity antimicrobial, multilayered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

How easy is it to change the filters?

Whether you have a standalone or add-on module filter bags are accessed in the same manner. Remove inlet cover, quarter turn 4 locking mechanisms and remove the section to replace bags. Designed to be clean simple and effective. Dust is contained in the bags to
minimize the mess and exposure of personnel to potentially harmful dust.

How can I use it?

The PF800/PF400 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are
available upon request.

Dimensions: H x W x D

PF800: 30 x 16 x 25 (in) / 76 x 40 x 64 (cm)
PF400: 24 x 12 x 15 (in)  / 76 x 30 x 38 (cm)

Contact us for help with your product selection. Toll free: 1-800-626-0664 or fill out the contact form to the right of this page.

Articulating Arms For Your Quatro Air Laser Fume Extractor

Fume, Dust, Odor Extractor System Black Extraction Arms (Articulating Flex Arm)

Contact Us

• Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
• Fax: 1-514-651-3995
• Skype: lito.espinosa
• Outside of North America: 1 (514) 364-5538
• Fill out the Contact Form (right side of page)

Laser cutting with wood produces "sticky smoke"

Premature clogging of main filters - HEPA filter and the Odor Filter / Chemical Filter

The CSA600 series Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed

CSA600 Series Laser Fume Extractor Air Filtration System

efficiently:
• The unit contains Merv 13 Bag filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.
• The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.
• This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.
The gas phase filter is quite large and 15” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.
• Depending on the type of media the modules could weigh as much as 70 lbs.
• Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.
• This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.
• The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter
Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure allowing us to continue to evacuate the laser chamber. The system is equipped to advise you when the filters need to be changed.

Contact us for help with your Laser Cutting, Engraving Fume Extraction System needs: 

Call us toll free in North America  1-800-626-0664 or fill out the contact form to the right of the page.

Thanks and have a great day!!

Laser cutting Delrin

DuPont™ Delrin® acetal homopolymer resin is a highly-crystalline engineering thermoplastic.

Our Laser Fume Extractors generally come with deep bed chemical filtration (we have one that’s 8” deep, one that’s 15” deep) loaded with our general purpose chemical media blend. For most applications the general purpose blend would suffice.

If you’re cutting materials such as Delrin you will most likely require a special combination of chemical filtration with a mix of chemical media blend to be effective in dealing with the fumes produced in the process of cutting Delrin.

We suggest you let us know what materials you work with in order for us to provide you the best recommendation for your air filtration, fume extraction needs.

Effective laser fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our laser fume extractors feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and deep bed activated carbon modules.

Laser Fume Extractors | Air Filtration Systems | High Pressure | High Speed Turbine Motor / Blowers

Contact Us for help with your product selection:

• Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
• Fax: 1-514-651-3995
• Skype: lito.espinosa
• Outside of North America: 1 (514) 364-5538

Designed for heavy duty laser fume dust chemical fumes applications

Quatro Air Technologies - CSA600 Series - Designed for heavy duty laser fume dust chemical fumes applications

• Multi-stage fitration system: filter bag (or high capacity pleated filter),
• medical grade HEPA and chemical filter
• Refillable, 15” deep chemical filter module, up to 66 lbs (30kg)
• LaserBlue gel seal guarantees ZERO FILTER BYPASS
• Dual high speed turbine for high suction, pressure and airflow
• Office friendly, whisper quiet operation
• Digital control panel
• Enhanced mobility with heavy duty lockable casters

More info - check it out:

• Air Flow: 0-480 m³/h / 0-282 CFM
• Max Pressure:  90" W.C. / 22 kPa
• Motor(s): 2 X 1.0 kW High Speed Turbine
• Voltage: 120V or 230V
• Dimensions: 13"W x 21"D x 45"H / 330mm x 533mm x 1143mm
• Filter Sequence:
  Antimicrobial high capacity bag filter (F128)
  6" Pleated filter, 60% ASHRAE rated (F073)
  2” Medical grade HEPA Filter 99.97% (F074)
  15“ Chemical filter (AG111)
• Optional lnlets: 1.5”, 2”, 3” or 4" diameter | Extraction Articulating Arms
• Discharge: Recirculation grille (Standard configuration);
•  Optional 3" or 4" side discharge collars for venting to the exterior
• Sound Level: 52 dBA at full speed
• Controls: Remote ON/OFF, communication capabilities, audible and visual alarms
• Suction hose: 6 feet (2m) of heavy duty hose and clamps
• Quatro reserves the right to modify any specifications, at any time without prior notice.

Contact Us

    Toll Free:

    1-888-395-0330 or

    1-800-626-0664 (North America- Continental USA and Canada)

    Skype: lito.espinosa

    Outside of North America: 1 (514) 421-0658

Velocity X4 Welding Fume Extractor System – Dust Smoke Odor

Source capture, dust, smoke, chemical fumes, gases with our Velocity X4 Welding Fume Extractor System

The Velocity X4 Welding Fume Extractor System is here….

Source capture, dust, smoke, chemical fumes, gases with our Velocity X4 Welding Fume Extractor System

Velocity X4 welding unit – air filtration system comes equipped with:

• Knock out spark arrestor plate
• Pre-filter wrap captures larger particles of dust and airborne debris
• High efficiency cartridge 99.9% on 1 micron for dust, smoke, and particulate air filtration
• 7 foot , 4” diameter flexible arm, provides an amazing 4500-5000 Feet per minute capture velocity
• Casters for manoeuvrability
• Activated Carbon Filter Discharge Door for removing / reducing odors, chemical fumes and gases
• Best part is it is priced under $3000.00 USD

Closer look at the new articulating flex arm – click here.

Call us toll free (in North America), 1-800-626-0664, or Skype: lito.espinosa, or 1-514-421-0658 (outside of North America- we ship overseas) – or use the contact form – click here.

Epilog Laser Marking, Laser Cutting, Laser Engraving System Laser Fumes, Dust, Odor Extractor Air Filtration Systems

Your Epilog Laser Marking, Laser Cutting, Laser Engraving System and our Laser Fumes, Dust, Odor Extractor, Air Filtration Systems

• Epilog Zing 16 (16”x12”) – 4” diameter port
• Epilog Zing 24 (24”x12”) – 4” diameter port
• Epilog Legend Mini 18 (18”x12”) – 4” diameter port
• Epilog Legend Mini 24 (24”x12”) – 4” diameter port
• Epilog Legend Helix 24 (24”x18”) – 4” diameter port
• Epilog Legend 36EXT (36”x24”) – 4” diameter port
• Epilog Fibermark (24”x12”) – 4” diameter port

Laser and Laser Marking Fume Odor Dust Extractor Air Filtration System

We are blessed and fortunate to work with a company that has been the OEM supplier of choice for numerous manufacturers of laser engravers and cutters. Working closely with the manufacturers has allowed them to constantly improve their products and custom design the next generation of air filtration for the laser cutting, marking and engraving industry. They have been supplying units to the industry for the past eight years and are now on our fourth generation of product with innovations such as our zero bypass Laser Blue Gel. Manufacturers and customers have done extensive testing when comparing their units to competitors and time and time again we hear that their units are more powerful and quieter. We are confident that no other manufacturer of air purification systems can provide such industry proven technology that can compete with them.

Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.

All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust / particulate collector as well.

Browse our Laser and Laser Marking Fume Odor Dust Extractor Air Filtration System Page – http://www.airpurifiers-r-us.com/laser_laser_marking.html

Contact Us

• Toll Free:
  1-888-395-0330 or
  1-800-626-0664 (North America- Continental USA and Canada)
• Skype: lito.espinosa
• Outside of North America: 1 (514) 421-0658
• Contact Us Form - Click on this link to send us message

Mobile Welding Fume Extractor Air Filtration System

• Easy to use source capture, articulating flex arm
• High air flow, low pressure drop
• Washable cartridge filter
• Energy efficient
• Low operating costs
• ETL approved to UL507 and CSA 22.2

Key features:

• Maneuverability – heavy duty casters make it easy to move the unit around the shop
• Filter life – cleanable, washable cartridge
• Extend fume capture area – 360 degree, easy to operate, low resistance extraction arms, available 7’ – 10‘
• Increase productivity – high capacity dust debris tray, tool free filter replacement reduce down time
• Quiet operation – only 58 dBA, additional sound reduction if required

Light to medium duty welding – Ideal for smaller facilities

MIG – TIG – STICK – OXY FUEL

Mobile, powerful source capture welding fume, smoke extractor, removes hazardous fumes from the work area without contaminating the surrounding space.

Highly efficient, multi-stage filtration system includes:

1. internal aluminum mesh spark arrestor
2. pre-filter wrap
3. washable filter for sub-micron particles down to 0.2 microns
4. capture tray for larger particles
5. optional activated carbon filter

Efficient fume extraction system

Flexible, completely free from internal mechanisms, fume extraction articulating arm is ideal for welding operations.

Unobstructed airflow inside the arm guarantees maximum efficiency and capture velocity, lowest pressure drop, eliminates the build-up of particulate matter reducing maintenance costs.

Designed and built to last, the arms offer unparalleled performance for a wide range of welding applications.

• Dimensions: 26”L x 18”W x 28”H, 120 lbs
• Airflow (CFM): 600 nominal
• Filtration: Spark arrestor, pre-filter wrap, washable cartridge filter (BIA rating 99.93% on 0.2-2 micron)
• Power: 120V, 60Hz, 10A
• Mobility: Heavy duty caster wheels
• Cabinet: Heavy gauge welded steel
• Options: 10’ articulating capture arm, activated carbon filter, pressure gauge, silencer, remote ON?OFF switch

Contact Us

• Toll Free:
  1-888-395-0330 or
  1-800-626-0664 (North America- Continental USA and Canada)
• Skype: lito.espinosa
• Outside of North America: 1 (514) 421-0658
• Contact Us Form - Click on this link to send us message

BreathEasy Welding Fumes, Dust, Smoke, Odor Extractor – Air Filtration System

 

Source capture, dust, smoke, chemical fumes, gases with our Velocity X4 Welding Fume Extractor System

Velocity X4 welding unit – air filtration system comes equipped with:

• Knock out spark arrestor plate
• Pre-filter wrap captures larger particles of dust and airborne debris
• High efficiency cartridge 99.9% on 1 micron for dust, smoke, and particulate air filtration
• 7 foot , 4” diameter flexible arm, provides an amazing 4500-5000 Feet per minute capture velocity
• Casters for manoeuvrability
• Activated Carbon Filter Discharge Door for removing / reducing odors, chemical fumes and gases
• Best part is it is priced under $3000.00 USD

Contact Us

• Toll Free:
  1-888-395-0330 or
  1-800-626-0664 (North America- Continental USA and Canada)
• Skype: lito.espinosa
• Outside of North America: 1 (514) 421-0658
• Contact Us Form - Click on this link to send us message

Smoke Haze Dust Chemical Fumes Odor High Speed Laser Cutter Air Filtration System

Smoke Haze Dust Chemical Fumes Odor High Speed Laser Cutter Air Filtration System

Yes indeed air filtration fans. The use of large format Laser, High Speed Laser Cutters in cutting stainless steel, other metals, acrylic, plastics, wood and other raw materials is going mainstream.

And yes, using these time saving, efficient tools, these large format high speed laser cutting machines, do produce a lot of indoor air pollutants. There’s smoke, smoke haze, chemical fumes, odors, dust, and other airborne particles.

An all around air filtration system, air cleaner, air purifier, air scrubber equipped with pre-filter, post filter, HEPA filter (99.97% efficient down to .3 microns), Chemical gas filter / activated carbon filter is a must to have to help you maintain a clean air environment that is safe, healthy, and conducive to a productive and efficient manufacturing, production environment.

Our BreathEasy PRO once more fits the bill!! Mix and match filter selections and sequencing to match your air filtration needs. Choose between recirculating the air or a ducted set up.


| More |

Contact Us for help in choosing the right air filtration system, air cleaner, air purifier, air scrubber for your needs and application.

• Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
• Fax: 1 (419) 710-9876
• Secure Server Online order form
• Outside of North America
  (Europe, South America, Asia, Australia, Middle East):
  You may also fax to us your information request:
  eFax: 1 (419) 710-9876
• Contact Us Form - Click on this link to send us message

Quatro Air Fume Extractor and ACI Laser Compatibility Chart

Laser and Laser Marking

| Back to Laser and Laser Marking Page |

Quatro Air has been the OEM supplier of choice for numerous manufacturers of laser engravers and cutters. Working closely with the manufacturers has allowed us to constantly improve our products and custom design the next generation of air filtration for the laser cutting, marking and engraving industry. We have been supplying units to the industry for the past eight years and are now on our fourth generation of product with innovations such as our zero bypass Laser Blue Gel. Manufacturers and customers have done extensive testing when comparing our units to our competitors and time and time again we hear that our units are more powerful and quieter. We are confident that no other manufacturer of air purification systems can provide such industry proven technology that can compete with Quatro Air. 

Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

We are proud to introduce our new breakthrough technology. We call it the LASER BLUE GEL. This sleek blue design is nothing like the regular gasket you may find in other filtration units on the market. Due to it's elasticity, it allows zero bypass to any fumes, odors and VOCs. It's NON toxic and NON porous as well.

 Contact Us for help in choosing the right fume extractor for your application.

• Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
• Fax: 1 (419) 710-9876
• Outside of North America: 1 (514) 421-0658
  You may also fax to us your information request: eFax: 1 (419) 710-9876
• Contact Us Form - Click on this link to send us message

Laser Fume Extractor Epilog GCC Gravograph Universal Bosslaser Rofin Trotech Xenetech Videojet

Yes, we have laser fume extractors for these (Epilog GCC Gravograph Universal Bosslaser Rofin Trotech Xenetech Videojet) and other laser marking, laser engraving, laser cutting machines like YLP-DG series.

Not only are these fume extractors designed for extracting, removing fumes, odors from the air stream, they are also equipped to filter, remove, reduce, dust, debris and other airborne particulate matter.

Contact Us for help in choosing the right laser fume extractor, laser fume extraction system for your needs.

• Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
• Fax: 1 (419) 710-9876
• Outside of North America: 1 (514) 421-0658
  You may also fax to us your information request: eFax: 1 (419) 710-9876
• Contact Us Form - Click on this link to send us message

Nail Salon Spa Hair Salon Brazilian Hair Treatment Fume Odor Dust Extractor Air Filtration System

The Quatro Air SPH400 is a good acrylic fume, odor, extractor, air filtration system, air cleaner – it has very good air drawing, air pulling, capability and capacity, extracting from close to the source, owing to its high speed motor that could stand up to 90″ WC static pressure.

It even comes, as an option, with a dual air intake collar for a couple of flex hose or articulating hoses to attach to them. Great in a scenario where there are two nail acrylic application table along side each other – the SPH400 can be positioned in between the two tables – one (1) fume extractor air filtration system doing the work for two tables or stations.

The SPH400 comes with an impressive list of features.
Protect and care for the health and well being of your nail tech as well as your customer by reducing their exposure to these harmful to health chemical fumes and gases.

• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications
• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

Contact Us – click on the this link

• Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
• Fax: 1 (419) 710-9876
• Outside of North America: 1 (514) 421-0658
  You may also fax to us your information request: eFax: 1 (419) 710-9876
• Contact Us Form - Click on this link to send us message

Heavy dust debris odor laser engraving marking cutting application

Hi L,

We're running through out HEPA filters (F074) like there's no tomorrow!  Could you get another 3 to me?  If shipping is less than $50, just go ahead and charge my credit card please.  Thanks.

F

P.S.  I'm finding that I need to change filter every 10-15 hours or so of machine time.  I'm engraving bamboo mostly...are there any alternatives so it's more cost effective?  Thanks.

Introducing the PF-400S - Pre Filter Section

Laser and Laser Marking

PF-400S - Pre Filter Section

Description

• Multiple high density layered antimicrobial filter bags
• Easy to change
• Large holding capacity
• Self contained pre-filter section can be combined with any existing system that requires additional particulate filtration
• Can also snap onto existing SPH400 system

 

Dust Bag Filter - F128

Contact Us

CSA-600 Series Fume Extractor- Laser engraving, laser marking, laser cutting

Check out the impressive features of this CSA-600 series fume extractor system for, among others and varied applications, laser marking, laser engraving, and laser cutting.

CSA-600 – Fume Extractor, Heavy Duty Dust & Odor Removal

Description

• The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.  A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.  A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.  Chemical compounds can be customized based on specific applications
• With large collection bag, HEPA Filter & Deepbed Odor filters
• LaserBlue Gel seal guarantees NO BYPASS
• Dual hi-speed turbine for high suction, pressure & airflow
• Whisper quiet operation is office friendly
• Universal design allows for 2.5", 3", 4" inlet along with discharge

Additional details:

Our CSA626 filter system is designed to remove both particulate matter and gas phase contaminants.

The equipment is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently.

The unit contains Merv 13 Bag filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.

The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.

This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.

F128 – Merv 13 Bag Filter

F074 – Merv 17 HEPA filter

F073 - Deep Pleated high capacity safety filter

The gas phase filter is quite large and 15” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required. Depending on the type of media the modules could weigh as much as 70 lbs. Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet. This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed. The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter

AG111 – 15” deep bed gas phase chemical filter

LaserBlue Gel seal guarantees NO BYPASS

Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure allowing us to continue to evacuate the laser chamber. The system is equipped to advise you when the filters need to be changed.

Contact Us

• Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
• Fax: 1 (419) 710-9876
• Outside of North America: 1 (514) 421-0658
  You may also fax to us your information request: eFax: 1 (419) 710-9876
• Contact Us Form - Click on this link to send us message

Fume extractor, welding fumes, soldering fumes, laser marking, engraving, cutting odor air filtration

CSA-600 - Heavy Duty Dust & Odor Removal

Description

• The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.  A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.  A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.  Chemical compounds can be customized based on specific applications
• With large collection bag, HEPA Filter & Deep bed Odor filters
• LaserBlue Gel seal guarantees NO BYPASS
• Dual hi-speed turbine for high suction, pressure & airflow
• Whisper quiet operation is office friendly
• Universal design allows for 2.5", 3", 4" inlet along with discharge

  

Contact Us

• Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
• Fax: 1 (419) 710-9876
• Outside of North America: 1 (514) 421-0658
  You may also fax to us your information request: eFax: 1 (419) 710-9876
• Contact Us Form - Click on this link to send us message

Soldering Station Fume Extractor 8 to 20 Stations

Solder Fume Extraction

Why are solder (chemical fumes, odors) fume extractors important:

People can become permanently sensitized to solder fumes. As a result continued exposure may cause asthma and other respiratory health issues depending on the amount of exposure. Employees should be protected from these health risks by using the best fume extraction systems available.

Why fume extraction is essential for personnel:

Worker safety is critically important in soldering applications. A well-designed and maintained dust and fume collection system is needed to prevent respiratory problems and keep facilities in compliance with current air-quality standards. In some cases, a good dust collection and ventilation system can eliminate the need for personal respirators and the challenge of getting employees to wear them.

Why should companies use fume extraction systems:

Many industrial processes such as soldering, laser processing and welding all produce dust and fumes which are hazardous to health and which can also reduce productivity or increase rejected products. Fumes can also damage expensive production equipment and cause extensive downtime for repair and/or cleaning. Many local and international health and safety regulations require the employer to protect personnel from hazardous dust and fumes. Failure to do so can result in expensive compensation claims and fines.

Possible health symptoms due to soldering smoke

■ headaches;
■ fatigue;
■ irritability;
■ constipation;
■ nausea;
■ stomach pains;
■ amnesia
■ dizzyness;
■ loss of weight.

Continued uncontrolled exposure could cause far more serious symptoms such as:

■ kidney damage;
■ nerve and brain damage.
■ cancer

SPH-400 Series Solder Fume Extractor System

• Designed for workstations with multiple soldering stations
• Heavy Duty General Purpose units capture SOLDER SMOKE & FUMES at source, before they migrate throughout the room
• Ideal for: SOLDER FUMES, FLUX, WAXING FUMES, SOLVENT VAPORS (Isopropenal - cleaning)
• Higher static capability & higher filtration capability than conventional SolderPure with 40lbs. (18kg) of odor and VOC treatment. 
• Higher static allows for remote installation of up to 8 soldering stations
• whisper quiet

 

SPH-800 Series Series Solder Fume Extractor System

• Capture solder smoke & fumes at source using small diameter tip extraction
• Ideal for up to 20 soldering irons
• High pressure system is economical
• Whisper quiet ( 52 dba )
• Compact installation requiring no bulky and expensive ductwork
• Filters easily accessed and changed in less then 1 minute ( no tools required )
• Powder coated durable welded cabinet
• Recirculating purified air reduces heating and air conditioning cost
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions with up to 560cfm.
• This unit has many options and can be customized for OEM applications

 

Contact Us

• Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
• Fax: 1 (419) 710-9876
• Outside of North America: 1 (514) 421-0658
  You may also fax to us your information request: eFax: 1 (419) 710-9876
• Contact Us Form - Click on this link to send us message

Laser marking light fume odor extractor air filtration system

For light dust, fume, odor, smoke, source capture, extraction, air filtration system the SPL400 fume, odor, dust extractor – air filtration system could be for you.

• Heavy gauge welded steel construction
• Powder coated “Quatro White”
• Standard inlet, 3” diameter (75mm) collars
• Clean air discharge grills located underneath the dust, fume, extractor system
• Maximum airflow 300 CFM (142 l/esc)
• Quiet operation, less than 60dB
• 120 V, single phase, 1.6A
• Blowers are backward inclined, none overloading motorized impellers
• 6 ft. long electrical cord (2m)
• Analog control panel
  manual on / off switch
  speed control
  circuit breaker
• Filter sequence supplied for dust only application:
  4” high capacity pleated filter
  6” HEPA filter, 99.97% down to .3 micron
  2” Activated carbon filter
  
• Easy tool-less filter change out
• 6 ft. (2 m) heavy duty industrial hose
• Limited one year warranty
• Dimensions: 13” x 16” x 28” (330mm x 406mm x 711mm)
• Approximate operating weight, 70 lbs (31 kg)

Contact Us

• Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
• Fax: 1 (419) 710-9876
• Outside of North America: 1 (514) 421-0658
  You may also fax to us your information request: eFax: 1 (419) 710-9876
• Contact Us Form - Click on this link to send us message