LASER CUTTING, STICKY FUMES, PREMATURE FILTER CLOGGING

 

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later.

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractorsor ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF801/PF401 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

Who needs it?

Customers that have heavy dust loadings will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

The PF801/PF401 modules contain three (PF801) or two (PF401) high-capacity antimicrobial, multi-layered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

What’s inside?

The PF801/PF401 modules contain three (PF801) or two (PF401) high-capacity antimicrobial, multi-layered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

How easy is it to change the filters?

Whether you have a standalone or add-on module filter bags are accessed in the same manner. Remove inlet cover, quarter turn 4 locking mechanisms and remove the section to replace bags. Designed to be clean simple and effective. Dust is contained in the bags to

minimize the mess and exposure of personnel to potentially harmful dust.

How can I use it?

The PF801/PF401 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are available upon request.

Dimensions: H x W x D

PF801: 30 x 16 x 25 (in), 46 lbs / 76 x 40 x 64 (cm), 21 kg

PF401: 24 x 12 x 15 (in), 36 lbs / 76 x 30 x 38 (cm). 16 kg

Contact us for help with your product selection. Toll free: 1-800-626-0664 or fill out the contact form on our Contact page.

LASER CUTTING | STICKY SMOKE | PREMATURE CLOGGING

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF800/PF400 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

Who needs it?

Customers that have heavy dust loadings will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

What’s inside?

The PF800/PF400 modules contain three (PF800) or two (PF400) high-capacity antimicrobial, multilayered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

How easy is it to change the filters?

Whether you have a standalone or add-on module filter bags are accessed in the same manner. Remove inlet cover, quarter turn 4 locking mechanisms and remove the section to replace bags. Designed to be clean simple and effective. Dust is contained in the bags to
minimize the mess and exposure of personnel to potentially harmful dust.

How can I use it?

The PF800/PF400 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are
available upon request.

Dimensions: H x W x D

PF800: 30 x 16 x 25 (in) / 76 x 40 x 64 (cm)
PF400: 24 x 12 x 15 (in)  / 76 x 30 x 38 (cm)

Contact us for help with your product selection. Toll free: 1-800-626-0664 or fill out the contact form to the right of this page.

Laser cutting with wood produces "sticky smoke"

Premature clogging of main filters - HEPA filter and the Odor Filter / Chemical Filter

The CSA600 series Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed

CSA600 Series Laser Fume Extractor Air Filtration System

efficiently:
• The unit contains Merv 13 Bag filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.
• The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.
• This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.
The gas phase filter is quite large and 15” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.
• Depending on the type of media the modules could weigh as much as 70 lbs.
• Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.
• This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.
• The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter
Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure allowing us to continue to evacuate the laser chamber. The system is equipped to advise you when the filters need to be changed.

Contact us for help with your Laser Cutting, Engraving Fume Extraction System needs: 

Call us toll free in North America  1-800-626-0664 or fill out the contact form to the right of the page.

Thanks and have a great day!!

Nail Salon Acrylic Fumes Odor Air Filtration Air Cleaner

The SPH400 is a good acrylic fume, odor, extractor, air filtration system, air cleaner – it has very good air drawing, air pulling, capability and capacity, extracting from close to the source, owing to its high speed motor that could stand up to 90″ WC static pressure.

It even comes, as an option, with a dual air intake collar for a couple of flex hose or articulating hoses to attach to them. Great in a scenario where there are two nail acrylic application table along side each other – the SPH400 can be positioned in between the two tables – one (1) fume extractor air filtration system doing the work for two tables or stations.

The SPH400 comes with an impressive list of features.

Protect and care for the health and well being of your nail tech as well as your customer by reducing their exposure to these harmful to health chemical fumes and gases.

• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications
• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

Contact Us for help with choosing the right air filtration system for your needs

• Toll Free:
  1-888-395-0330 or
  1-800-626-0664 (North America- Continental USA and Canada)
• Skype: lito.espinosa
• Outside of North America: 1 (514) 421-0658
• Contact Us Form - Click on this link to send us message

Laser and Laser Marking Quatro Air SPH-400 Fume Extractor

Laser and Laser Marking

SPH-400 - Multi Purpose Filtration Station

Description

• Our most popular unit for small to medium duty laser applications
• Designed to fit into an application where direct capture from the source is possible
• The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
• LaserBlue Gel seal guarantees NO BYPASS
• This unit is available in brushed and brushless versions
• This unit has many options and can be customized for OEM applications
• We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!
• Source capture arms available: Option 1, Option 2
• Optional digital i-series control panel - highly recommended

Download PDF -  http://www.airpurifiers-r-us.com/pdf/SPH-400%20USD.pdf (prices subject to change without prior notice)

Contact Us for help in choosing the right air filtration , fume and dust extractor system for your needs

• Toll Free:
  1-888-395-0330 or
  1-800-626-0664 (North America- Continental USA and Canada)
• Skype: lito.espinosa
• Outside of North America: 1 (514) 421-0658
• Contact Us Form - Click on this link to send us message

Smoke Haze Dust Chemical Fumes Odor High Speed Laser Cutter Air Filtration System

Smoke Haze Dust Chemical Fumes Odor High Speed Laser Cutter Air Filtration System

Yes indeed air filtration fans. The use of large format Laser, High Speed Laser Cutters in cutting stainless steel, other metals, acrylic, plastics, wood and other raw materials is going mainstream.

And yes, using these time saving, efficient tools, these large format high speed laser cutting machines, do produce a lot of indoor air pollutants. There’s smoke, smoke haze, chemical fumes, odors, dust, and other airborne particles.

An all around air filtration system, air cleaner, air purifier, air scrubber equipped with pre-filter, post filter, HEPA filter (99.97% efficient down to .3 microns), Chemical gas filter / activated carbon filter is a must to have to help you maintain a clean air environment that is safe, healthy, and conducive to a productive and efficient manufacturing, production environment.

Our BreathEasy PRO once more fits the bill!! Mix and match filter selections and sequencing to match your air filtration needs. Choose between recirculating the air or a ducted set up.


| More |

Contact Us for help in choosing the right air filtration system, air cleaner, air purifier, air scrubber for your needs and application.

• Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
• Fax: 1 (419) 710-9876
• Secure Server Online order form
• Outside of North America
  (Europe, South America, Asia, Australia, Middle East):
  You may also fax to us your information request:
  eFax: 1 (419) 710-9876
• Contact Us Form - Click on this link to send us message