High Efficiency Air Filtration Systems Air Scrubbers For Data Centers

Telecommunications, Electronic control rooms (pulp & paper, petrochemical, manufacturing, etc.), High tech industry (chip manufacturing, process rooms, etching areas)

Data centers are dynamic environments where maintenance operations, infrastructure upgrades, and  equipment  changes  take  place  regularly,  leading  to  possible  introduction  of  airborne contaminants. Data centers also house other contaminants, such as chlorine, that can be emitted from PVC insulation on wires and cables if temperatures get too high.

Corrosive Environment Protection - Corrosion of contacts and components on circuit boards accounts for 30 to 40% of all equipment failures. The eCorrosion is caused by an unmanaged environment consisting of combinations of uncontrolled temperature and humidity, along with harmful corrosive gases inside the electronic equipment rooms. Early life failures due to eCorrosion could result in unplanned warranty, and other maintenance and replacement related costs.

POSITIVE PRESSURIZATION - The unit delivers a high volume of filtered, contaminant-free air directly to the cabinet, creating a positive pressure environment.

RECIRCULATION - the air filtration system continuously recirculate the air in the environment and progressively reduces the concentration of contaminants.

Featured Air Filtration, Air Purification Systems

Contact Us

• Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
• Fax: 1-514-651-3995
• Skype: lito.espinosa
• Outside of North America: 1 (514) 364-5538
• Fill out the Contact Form (below right)

LASER CUTTING | STICKY SMOKE | PREMATURE CLOGGING

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF800/PF400 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

Who needs it?

Customers that have heavy dust loadings will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

What’s inside?

The PF800/PF400 modules contain three (PF800) or two (PF400) high-capacity antimicrobial, multilayered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

How easy is it to change the filters?

Whether you have a standalone or add-on module filter bags are accessed in the same manner. Remove inlet cover, quarter turn 4 locking mechanisms and remove the section to replace bags. Designed to be clean simple and effective. Dust is contained in the bags to
minimize the mess and exposure of personnel to potentially harmful dust.

How can I use it?

The PF800/PF400 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are
available upon request.

Dimensions: H x W x D

PF800: 30 x 16 x 25 (in) / 76 x 40 x 64 (cm)
PF400: 24 x 12 x 15 (in)  / 76 x 30 x 38 (cm)

Contact us for help with your product selection. Toll free: 1-800-626-0664 or fill out the contact form to the right of this page.

Articulating Arms For Your Quatro Air Laser Fume Extractor

Fume, Dust, Odor Extractor System Black Extraction Arms (Articulating Flex Arm)

Contact Us

• Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
• Fax: 1-514-651-3995
• Skype: lito.espinosa
• Outside of North America: 1 (514) 364-5538
• Fill out the Contact Form (right side of page)

Reducing, Removing, Photocopier, Laser Printer Odors

Do odors from your photocopier, photo copy machine, or laser printer bother you or others who work in its vicinity?

Multi-stage Air Filtration Systems

You can provide some relief by using an air filtration system, air cleaner with a filter configuration that doesn't just address airborne particulates but chemical gases, fumes, and odors as well.

You can go with a portable air filtration system, air purifier, that has a source capture hose or capture arm positioned near the exhaust of the machine or a stand alone room recirculating unit.

You want have an air cleaner that has a particulate pre-filter, a HEPA filter, and an Activated Carbon Odor Filter.

Stand alone recirculating room air purifier, air cleaner

Source Capture Flex Hose with Capture Cone

Call us or message us for help with your product selection - toll free in North America - 1-800-626-0664, Outside of North America call +1-514-364-5538. You can also use the contact form on the side bar of this page.

Have a great  day in the office!!

Laser cutting with wood produces "sticky smoke"

Premature clogging of main filters - HEPA filter and the Odor Filter / Chemical Filter

The CSA600 series Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed

CSA600 Series Laser Fume Extractor Air Filtration System

efficiently:
• The unit contains Merv 13 Bag filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.
• The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.
• This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.
The gas phase filter is quite large and 15” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.
• Depending on the type of media the modules could weigh as much as 70 lbs.
• Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.
• This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.
• The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter
Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure allowing us to continue to evacuate the laser chamber. The system is equipped to advise you when the filters need to be changed.

Contact us for help with your Laser Cutting, Engraving Fume Extraction System needs: 

Call us toll free in North America  1-800-626-0664 or fill out the contact form to the right of the page.

Thanks and have a great day!!

Air Quality In Your Office, Work Environment

Indoor Air Quality In Your Office, Work Environment |  How to Improve It

Indoor air pollution affects worker health, well-being and overall productivity.

You spend your days toiling away on keyboards, on the phone, preparing for meetings, presentations and projects. The office and home have become synonymous workplace environments for a variety of professionals. What is it that you have in common with most people who work in an office?
Aside from the sigh of relief and waited anticipation for Friday to roll around - actually, most office workers or those who work from home are regularly exposed to poor indoor air.

In a 2012 study on office IAQ (Indoor Air Quality) and workers’ blood, scientists found concentrations of toxins in office air that were 3-5 times higher than those reported in previous studies of household air, "suggesting that offices may represent a unique and important exposure environment." 

HEPA + Activated Carbon Chemical Filter

• Compact portable system for people who suffer with Allergen super sensitivity
• Ozone free system, with 99.97% sub micron dust removal
• Powerful backward inclined motorized impeller provides high room air changes
• High efficiency motor with low amperage draw
• Digital variable speed control allows for whisper quiet night time operation
• Airflow: 700 CFM free air, Operating range: 60 – 500 CFM
• Whisper quiet operation bedtime operation, 42 dBA at low speed
• Audible and visual LED alarms provide feedback
• Microprocessor AUTOFLOW feature speeds up fan automatically as filters get dirty to maintain airflow
• Easy serviceability and filter changing
• Ability to customize filter sequence to meet specific needs
• Ability to customize filters for people suffering from a specific and/or unique Chemical sensitivity

Call us for help with your air purifier product selection - toll free: 1-800-626-0664 or fill out the contact form to the right of this page.

Keeping the air dust-less if not dust-free | Art Restoration | Art Forensics

Keeping the air dust-less if not dust-free | Art Restoration | Art Forensics

Air Filtration for Small Spaces

BH Series for Home, Office, and Small Commercial Spaces

• Ozone free system, with 99.97% sub micron dust removal
• Powerful backward inclined motorized impeller provides high room air changes
• High efficiency motor with low amperage draw
• Digital variable speed control allows for whisper quiet night time operation
• Airflow: 700 CFM free air, Operating range: 60 – 500 CFM
• Whisper quiet operation bedtime operation, 42 dBA at low speed
• Audible and visual LED alarms provide feedback
• Microprocessor AUTOFLOW feature speeds up fan automatically as filters get dirty to maintain airflow
• Easy serviceability and filter changing
• Ability to customize filter sequence to meet specific needs

Air Purification for Larger Spaces

• High dust and odor removal, filtration capabilities | Attractive, compact and portable | Extremely quiet, 56 dBA
• Does not require ductwork eliminating installation costs
• Ducting capabilities if needed
• Unique, maintenance friendly design, filters can be changed in minutes
• Filter flexibility allows for multi-purpose use – mix and match to suit and configure to your needs and application
• 2” Pleated pre-filter
  6” High capacity filter
  12” High capacity filter
  2” HEPA filter
  6” HEPA filter
  12” HEPA filter
• 2” Activated carbon filter
  12” Activated carbon filter
  UV Light (Ultra-Violet "U" Bulb)
• Digital controls
• Audible and Visual alarms
• Caster mounted

Contact us for help with your product selection. Call toll free, in North America: 1-800-626-0664 or fill out the contact form on the right hand side of the page.

Have a great day!!